Вакуумный контроллер RGC101
Под заказ
Цена по запросу
в корзине
Описание
Вакуумный контроллер для индикации давления и управления вакуумными процессами по показаниям подключённых преобразователей. Обеспечивает пороговое управление исполнительными устройствами через релейные выходы. Применяется в системах автоматизации вакуумного оборудования.
Технические характеристики
| ● Электропитание | ||
|---|---|---|
| Voltage | +24VDC、±5%、Vpp ≤ 0.5V | |
| Current | Max: 1A/channel | |
| Overcurrent protection | 1.5A、self-recovery PTC fuse | |
| Total Power | ≤ 60W | |
| ● Operating power | Operating Voltage | 130 ~ 240VAC |
| Operating frequency | 50 ~ 60Hz | |
| Overvoltage rating | II | |
| Protection level | IP30 | |
| ● Working environment | ||
| Storage Temperature | -40℃ ~ 65℃ | |
| Working Temperature | 10℃ ~ 45℃ | |
| Relative humidity | ≤ 75%, temperature ≤ 31°C | |
| Use environment | Indoor only, altitude ≤ 2000m | |
| Protection class | IP30 | |
| ● Manipulation | ||
| Local control | Via four buttons | |
| Remote control | Via “USB-B” interface | |
| ●Measurement data | ||
| Measuring range | Dependent on connected transmitters | |
| Measurement Error | ||
| Fullness Error | ≤ 0.01% F.S. (typical) ≤ 0.1% F.S. (full temperature, long time) | |
| Zero Offset | ≤ 0.005% F.S. (typical) ≤ 0.02% F.S. (full temperature, long time) | |
| Measurement rate | 10/S (per channel) | |
| Display rate | 5/S | |
| Filter constant | ||
| OFF | nil | |
| Fast | 200mS(fg = 0.8Hz) | |
| Normal | 800mS(fg = 0.2Hz) | |
| Slow | 8S(fg = 0.02Hz) | |
| Data unit | mBar、Torr、Pa、Micro、HPa、KPa、V | |
| Zero Compensation | Valid for linear transmitters | |
| Linearity Compensation | 0.100 ~ 10.00 | |
| Analog/Digital Conversion | Resolution 0.001% F.S. | |
| ● Output control | ||
| Number of control channels | ||
| RGC-103 | 6-way | |
| Control hysteresis | ≤ 100mS | |
| Control range | Connection-dependent transmitter | |
| Release backlash | ||
| ≥ 1% F.S. (linear transmitter) | ||
| ≥ 10% F.S. (logarithmic transmitter) | ||
| Actuator | Relay | |
| Contact form | Normally open, normally closed, three contacts | |
| Contact resistance | ≤ 100mΩ | |
| Contact material | AgNi, AgSnO2 | |
| Contact load (resistive) | 3A, 30VDC | |
| 1A, 125VAC | ||
| Mechanical life | 1×10 7 times | |
| Electrical life | 1×10 5 times (3A, 30VDC) | |
| Connection Port | DB25, Hole Holder | |
| ● Fault protection | Number of control paths | 1 way |
| Control hysteresis | ≤100mS | |
| Actuator | Relay | |
| Contact Form | Normally open, normally closed, three contacts | |
| Contact resistance | ≤ 100mΩ | |
| Contact material | AgNi, AgSnO2 | |
| Contact load (resistive) | 3A, 30VDC | |
| 1A, 125VAC | ||
| Mechanical life | 1×10 7 times | |
| Electrical life | 1×10 5 times (3A, 30VDC) | |
| Connection Port | DB25, Hole Holder | |
| ● Output voltage | Number of Outputs | |
| RGC-103 | 3-Way | |
| Output range | -5V ~ +14.5V (DC) | |
| Display value difference | ±20mV | |
| Output impedance | < 50Ω | |
| Output voltage-pressure | Connection-Dependent Transmitter | |
| Connection port | DB9, Pin Header | |
| ● Analog output | Number of output channels | |
| RGC-103 | 1 Way | |
| Output Range | 0V ~ +10V (DC) | |
| Resolution | 1mV | |
| Accuracy | ±20mV | |
| Output Impedance | < 50Ω | |
| Output Voltage-Pressure | Connection dependent transmitter | |
| Connection Port | DB9, Pin Header | |
| ● USB-A port | Connection Protocol | FAT file format |
| ● USB-Bport | Connection Protocol | ASCII file format |
| Data format | Virtual Serial Port | |
| Communication rate | 1-bit start, 1-bit stop, 8-bit data, no parity, no handshake | |
| ● Overall weight | 9600、19200、38400 | |
| ● Overall Dimensions | Width, Height, Length | 1Kg |